5N.m/500N金属接骨螺钉自攻力扭矩试验系统，测量具有自攻性能的金属接骨螺钉旋入标准材料时所需轴向自攻压力荷载值。测量旋入扭矩荷载和轴向位移变量值。测量接骨螺钉轴向拔出力、旋入旋出旋动扭矩、轴向插入力。
→不同材质自攻骨螺钉扭矩力测试研究(不锈钢/可吸收骨螺钉/聚交酯共聚物/L-丙交酯树脂/乙交酯树脂，L-乳酸树脂/刚性聚氨酯泡沫塑料/水解降解聚合物树脂)。
→不同螺纹型式骨螺钉机械性能测试研究(深螺纹及浅螺纹、全螺纹及半螺纹、对称及不对称螺纹)。
→不同用途骨螺钉机械性能测试研究(皮质骨螺钉、松质骨螺钉、V形髓内钉、三叶形髓内钉、空心螺钉)。
→不同旋动形式骨螺钉机械性能测试研究(一字槽、十字槽、内六角、四方槽、内三角、梅花形)。
→不同头部型式骨螺钉机械性能测试研究(锥形头部、球形头部、半圆形头部、四方形头部)。
→自攻螺钉测试范围：HA/HB/HC/HD1.5-8.0mm；标称直径1.5-3.5-8.0mm。
→轴向压力荷载传感器0～500N，精度0.5%FS，分辨力0.01N；
→旋转扭矩荷载传感器0～5N.m，精度0.5%FS，分辨力0.001N.m；
→线性位移传感器200mm，精度0.5%FS，分辨力0.01mm；
→试验速度：旋转扭矩力以30r/min恒定速率施加，轴向压缩荷载以2N/s恒定速率递增。
→自攻力最大预载荷1.0N，以保证螺钉和工装紧密契合。
→旋入旋出旋动扭矩按照3r/min速度施加扭矩于螺钉头部，旋转4圈的扭矩值为最大旋入扭矩。反向旋转4圈螺钉测量旋出最大扭矩。旋入和旋出试验过程中施加不大于11.7N轴向载荷。
→HRJ-Test自攻力扭矩试验测控软件（多通道多功能易操控），采集频率1000Hz，实时记录处理分析轴向压力、扭矩、轴向位移。同时记录两个Y轴数据（Y轴1为力和扭矩，Y轴2为位移）随时间的变化。
→ASTM F543-23；ISO 9268；ISO 5833；ISO 5835；ISO 6475；ISO 5832-2；ISO 5832-3；ISO 5832-11；ISO 5837-2；ASTM F67；ASTM F136；ASTM F1295；ASTM F1472；ASTM F2502；ASTM F116；ASTM E122；YY 0018-骨接合植入物金属接骨螺钉；YY/T1505-金属接骨螺钉自攻性能试验方法；YY/T1504-金属接骨螺钉轴向拔出力试验方法；YY/T1506-金属接骨螺钉旋动扭矩试验方法；YY 0315-2023钛及钛合金牙种植体；YY/T0119.2-脊柱植入物脊柱内固定系统部件第2部分金属脊柱螺钉；YY/T0662-不对称螺纹和球形下表面金属的金属接骨螺钉机械性能要求和试验方法；人工关节材料生物力学性能试验机；YY/T0019.1-横截面为三叶形或V形髓内钉；YY/T0119.1-脊柱植入物脊柱内固定系统部件通用要求；YY/T0509-生物可吸收内固定板和螺钉的标准要求和测试方法；YY/T0346-2022金属股骨颈固定钉；大小鼠骨骼肌腱韧带损伤医学康复检测性能试验机系统；YY/T1655-骨接合植入物 接骨板和接骨螺钉微动腐蚀试验方法；YY 0300-2025牙科学修复用人工牙；带柄股骨部件椎间融合器生物力学试验机；金属接骨板弯曲疲劳性能试验机；
Standard Specification and Test Methods for Metallic Medical Bone Screws；Implant for surgery-Test method for determining the self-tapping performance of metallic bone screws；Implants for surgery-Test method for determining the axial pullout strength of metallic bone screws；Implants for surgery-Test method for driving torque of metallic bone screws；Wrought titanium and titanium alloy dental implant；Spinal implants-Components used in the surgical fixation of the spinal skeletal system-Part 2:Metallic spinal screws；Metal bone screws with asymmetrical thread and spherical under surface Mechanical requirements and test methods；Implants for surgery Intramedullary nailing systems；HRJ Tester；Intramedullary nails with cloverleaf or V-shaped cross-section；Spinal implants-Components used in the surgical fixation of the spinal skeletal system；General requirements；Standard specification and test methods for bioabsorbable plates and screws for internal fixation implants；Implants for osteosynthesis Metallic fixation screw for femur neck；HRJ Tester；Implants for osteosynthesis Standard test method for measuring fretting corrosion of osteosynthesis plates and screws；Dentistry-Artificial teeth for dental prostheses；Implants for surgery Acrylic resin cements；Dentistry-Corrosion test methods for metallic materials；Medical Engineering Medical Device Product Biological Materials Mechanical Testing System；Stemmed Femoral Components Endurance Properties Tester；Intervertebral Body Fusion Device Biomechanics Tester；Metallic Bone Plates Bending Fatigue Properties Tester；Orthopaedic Research Applications Miniature Biomechanics Tester；Tendon Ligament Shoulder Knee Joint Medical Testing Machine；Artificial Joint Material Biomechanical Properties Tester；Computer Bone Screws Torque Tester；Metallic Bone Plates Mechanics Properties Testing Machine；Orthopaedics Testing Machine；Dentistry Implants Mechanical Testing Machine；Medical Device Products Fatigue Life Testing System；Implants for Surgery Cyclic Fatigue Testing Machine；Medical Screwdrivers Torque Fatigue Tester； |
