销售热线:400-666-4245

试验机中心Products

SWLT-5全自动钢筋重量偏差测量仪Steel Bars Weight Length Tester

作者 Ming 浏览 发布时间 22/08/09
SWLT-5全自动钢筋重量偏差测量仪,一次测试5根钢筋试样,重量长度分别显示,测量精度±0.5%。热轧带肋钢筋、直条钢筋、螺纹钢筋、光圆钢筋、CRB冷轧带肋钢筋等钢材长度和质量偏差全自动测量。测定钢筋直径6mm~50mm重量长度偏差;钢材称重力分辨力0.1g;钢材长度测量分辨率0.01mm;移动式钢筋重量长度测试仪;HRJ-Test钢材质量长度测控系统;符合GB/T21839-2019每米公称质量偏差的确定。
GB/T21839-2019规定了预应力混凝土用钢材的拉伸弯曲试验、钢材反复弯曲试验、线材扭转缠绕试验、线材镀层附着力试验、钢绞线等温松弛试验、钢绞线轴向力疲劳试验、硫氰酸盐溶液应力腐蚀试验、钢绞线偏斜拉伸试验、每米公称钢筋质量偏差确定;jnshiyanji;SWLT-5全自动钢材重量长度测试仪;6mm~50mm钢筋重量偏差测量仪;1000kN无振动伺服万能材料试验机;2000kN无振动钢筋钢材拉伸试验机;500kN电液伺服材料弯曲试验机;300kN钢绞线轴向力疲劳试验机;600kN钢筋机械连接拉伸试验机;1000kN钢筋套筒灌浆连接件反复拉压试验机;预应力钢绞线钢材双位拉伸试验机;10mm钢材镀层附着力试验机;300kN钢材应力腐蚀松弛试验机;钢丝镀层均匀性试验机;三缸全自动钢筋板材弯曲试验机;13mm钢丝线材反复弯曲扭转试验机;13mm钢丝镀层附着力试验机;10mm钢丝线材缠绕试验机;300kN钢材等温应力松弛试验机;600kN钢材应力腐蚀试验机;100kN钢丝应力腐蚀试验机;热镀锌铝合金钢丝松弛试验机;铝合金钢丝扭转缠绕反复弯曲试验机;热镀锌钢丝Ⅰ级Ⅱ级松弛性能试验机;钢丝塑性延伸强度试验机;100kN铝合金钢丝塑性延伸强度试验机;ASTM 615-07;ASTM A416;ASTM E328-2013;BS 5896-2012;BS 4449;EN 10391;JIS G3536-2014;JIS Z2276-2012;JIS G3137;JIS G3112;JIS G3538;ISO 10065;ISO 15630;HRJ Tester;ISO 6934-3;ISO 6934-4;ISO 6935;ISO 14655;ISO 7438;AS-NZS 4671;AS NZS 4672.2;DIN 488-1;CNS 560;GB/T1499.1-2017;GB/T1499.2-2018;GB/T13788-2017;GB/T28900-2012;GB/T5224-2014;GB/T5223.3-2017;GB/T13014-2013;GB/T33279-2017;JGJ 18-2012;JGJ/T27-2014;hrjtest;GB/T30828-2014;GB/T33953-2017;GB/T33959-2017;GB/T20065-2016;GB/T25826-2010;JGJ 190-2010;GB/T33365-2016;GB/T10120-2013;GB/T20065-2016;GB/T30828-2014;GB/T3428-2012;GB/T31314-2014;GB/T31304-2014;GB/T30826-2014;GB/T33026-2017;GB/T25823-2010;GB/T33363-2016;50kN土工格栅拉伸试验机;100kN土工材料综合力学试验机;LVL层积胶合集成规格材抗弯强度及抗弯弹性模量试验机;铁路隧道盾构衬砌预制混凝土管片抗弯曲试验机;1MPa混凝土管片抗渗漏检测装置;6MPa管片用橡胶密封垫耐水压试验装置;500kN混凝土管片抗拔试验装置;603金属材料管塑性变形弯管试验机;65mm专用弯管试验机(GB/T244-2020金属材料管弯曲试验方法);金属摆锤冲击试验机;
Steel Bars Weight Length Tester;Steel Strand Skew Tensile Tester;Prestressing Concrete Steel Relaxation Tester;Steel Tensile Stress Relaxation Tester;jnshiyanji;1000h Tensile stress Relaxation Tester;Steel strand Stress Relaxation Tester;Steel wires bars Stress Relaxation Tester;Steel Wire Torsion Tester;Metallic Materials Wire Wrapping Tester;Bare Wires Mandrel Winding Tester;Automatic Clamping Steel Bar Torsion Tester;Metallic materials Wire Reverse Bend Tester;Steel Bar Bend Rebend Tester;Fully Automatic Steel Bar Repeated Bending Tester;Hydraulic Servo Materials Bending Tester;Hot rolled plain bars Rebending Tester;No Vibration Servo Universal Materials Tester;No Vibration Materials Mechanics Tester;Materials Axial Tensile Loading Strength Tester;Grouting Sleeve Strength Mechanics Tester;Steel bars Weight Length Tester;Rebar mechanical splicing Tensile Tester;Steel Strand Steel Bars Integration Tensile Tester;Metallic materials Tensile testing;metallic super plastic materials tensile properties;Metallic materials Tension Compression strength testing;Metallic Hot rolled ribbed bars tester;welded joint of reinforcing steel bars;Metallic materials Tube Bend tester;Metallic materials Tube Ring tensile tester;Tubes Transverse bending tester;Tube Drift expending tester;Metallic materials high strain rates Tensile testing;Servo hydraulic and other test systems;Metallic materials Fatigue testing Axial force controlled method;Axial loading constant-amplitude low-cycle fatigue of metallic materials;Thermal sprayed coatings Determination of tensile strength;Couplers for rebar mechanical splicing;Sintered bimetal material shear strength;Thermal sprayed metallic coatings shear strength;The grouting sleeve for rebars splicing;Concrete Axial Tension Load Tester;Repeated Tension Compression Tester for Grout Sleeve Splicing of Rebars;

首页 | 公司简介 | 产品中心 | 产品知识 | 新闻中心 | 荣誉资质 | 联系我们 | 网站地图
shiyanjizx@126.com; 87516768@163.com copyright 2015 济南试验机厂