GB/T 15777-2017木材顺纹抗压弹性模量测定Wood Parallel Compression Strength Modulus of Elasticit
作者 Ming
浏览
发布时间 21/04/30
GB/T15777-2017木材顺纹抗压弹性模量测定方法，适用于木材无疵小试样的顺纹抗压弹性模量测定。
试材锯解及试样截取按GB/T1929-2009木材物理力学试材锯解及试样截取方法。试材充裕时取初始试样尺寸为90x20x20mm截断成2段，其中主段60x20x20mm用于测定顺纹抗压弹性模量，长度为顺纹方向，试样上下端面要求平滑，互相平行并与长度方向保持垂直。次段20x20x20mm试样用于测定密度和年轮。试材不足时只取主段试样进行顺纹抗压弹性模量试验。
木材顺纹抗压弹性模量试验机；木材垂直承载力试验机；木材横纹承载力试验机；木材平行承载力试验机；300kN结构木材拉伸试验机；300kN结构木材顺纹抗拉强度试验机；300kN结构木材横纹抗拉强度试验机；300kN结构木材弹性模量试验机；300kN结构木材接缝抗剪强度试验机；300kN结构木材弯曲强度强度试验机；300kN结构木材抗压强度试验机；300kN木材垂直抗压承载力试验机；300kN木材抗拉承载力试验机；300kN木材横向承载力试验机；hrjtest；300kN木材扭转刚度试验机；300kN木材顺纹抗剪强度试验机；300kN规格材强度试验机；45*95mm规格材拉伸试验机；HRJ结构木材特性试验机；受弯木结构力学性能试验机；木基结构板材力学性能试验机；集成材理化性能试验机；胶合木结构综合性能试验机；装配式轻型木结构指接规格材试验机；120kN木板材静曲强度试验机；饰面用木质锯切薄板力学试验机；600kN原木产品检验力学试验机；胶合板单板层积材旋切单板原木弯曲试验机；饰面刨切单板原木荷载试验机；木材横纹抗拉极限应力试验机；木材径向弦向破坏荷载力学试验机；木材物理力学硬度试验机；GB/T50329-2012木结构试验方法标准；GB/T35217-2017锯切薄板；GB/T15787-2017原木检验；ISO 3346；ISO 3129；GB/T15779-2017旋切单板用原木；GB/T15106-2017刨切单板用原木；GB/T1943-2009木材横纹抗压弹性模量测定；10kN人造板防火板万能试验机；100kN人造板长试样大跨度试验机；2kN石膏板断裂荷载硬度试验机；10kN瓷砖板材抗折强度试验机；HRJ恒瑞金试验机；木材人造板力学性能试验机；山东省力值硬度计量委员；HRJ试验机服务中心；HRJ试验机配件供应中心；HRJ特殊夹具定制中心；20kN砂浆保温节能材料试验机；300kN脚手架木模板弯曲强度试验机；GB/T14017-2009木材横纹抗拉强度试验；GB/T1929-2009；AS/NZS 4063.1-2010；AS/NZS 4357.2；ISO 1033-1；ISO/DIS 12578；ISO/CD 12579；ISO/CD 12580；ISO/CD 18375；ANSI/AITC A 190.1；ASTM D 3737；DIN 1052；EN 386；EN 390；EN 408；BS EN 789；BS EN 326-1；GOST 9624；CNS 11671:2014；CNS 444:2012；ANSI/APA PRG320-2012；EWS S475；APA PS 1-09；APA L294-2011；ASTM D5055-2013；ASTM D3528；NF B51-127-19；ASTM D5456-2010a；APA EWS S550-2005；BS EN 1912：2012；GB 50005-2017；GB 50009-2012；GB 50206-2012；GB/T26899-2011；GB/T17659.1-2018；GB/T17659.2-2018；GB/T29893-2013；GB/T29897-2013；hrjtest；GB/T50329-2012；GB/T50708-2012；GB/T50772-2012；GB/T51233-2016；GB/T51226-2017；LY/T1927-2010；LY/T2228-2013；LY/T2388-2014；JGJ/T265-2012；
Wood Parallel Compression Strength Modulus of Elasticity；Wood grain Compression Strength Parallel to Grain；Bearing Strength Perpendicular to Grain；Method for determination of the modulus of elasticity in compression parallel to grain of wood；Standard for methods testing of timber structures；Cutting panel tester；Terms in log inspection；Log of peeled veneer tester；Log of sliced veneer；Method for determination of the modulus of elasticity in compression perpendicular to grain of wood；Method of testing in tensile strength perpendicular to grain of wood；Method of sample logs sawing and test specimens selection for physical and mechanical tests of wood；
Structural Timber Characterization Tensile Tester；hrjtest；Dimension Lumber Characterization Tester；Characterization of structural timber-Test methods；hrjtest；Stress-graded Timber tester；Bending Strength and Apparent Modulus of Elasticity；Tension Strength Parallel to Grain；Compression Strength Parallel to Grain；Beam Shear Strength；Bearing Strength Perpendicular to Grain；Bearing Strength Parallel to Grain；Modulus of Rigidity in Torsion；Tension Strength Perpendicular to Grain；Compression Strength and Modulus of Elasticity Perpendicular to Grain；Shear Strength at Joint Details；Testing Rectangular Sections of Sawn Solid Timber；Structural laminated veneer lumber (LVL) Test methods；hrjtest；Determination of structural properties-Test methods；Determination of mechanical properties of wood based panels；Determination of modulus of elasticity in bending and of bending strength；Plywood Bonding quality Test methods；Determination of tensile strength perpendicular to the plane of the board；hrjtest；Sampling and cutting of test pieces and expression of test results；Test method of evaluating the properties of glued-laminated timber；Visual grading rules for dimension lumber in light wood frame construction；hrjtest；Code for design of timber structures；Load code for the design of building structures；Code for acceptance of construction quality of timber structures；Technical code of glude laminated timber structures；Finger jointed structural dimension lumber in light wood frame construction；General specification for connector of light wood-frame construction；hrjtest；Log for lumber in light wood frame construction；Code for construction of timber structures；Technical code for light wood trusses；Sampling and judging methods for lot inspection of logs；Sampling and judging methods for lot inspection of sawn timbers；Various Testing Machines；Laboratory Equipment；Tester Service Center；Tester Fittings Supply Center；Test Accessories Design Manufacture Center；Special Test Accessories Center； |