200kN承插型盘扣式钢管支架构件试验机，恒瑞金公司制作。满足JG/T503-2016承插型盘扣式钢管支架构件。用于D48.3mm/60.3mmPKJ承插型盘扣式脚手架连接盘单侧抗剪强度试验、连接盘双侧抗剪强度试验、双侧弯剪强度试验、连接盘抗弯强度试验、连接盘抗拉强度试验、连接盘内侧环焊缝抗剪强度试验、可调托撑和可调底座抗压强度试验。碗扣式钢管脚手架上碗扣强度试验、下碗扣焊接强度试验、横杆接头强度试验、横杆接头焊接强度试验、KDZ可调支座抗压强度试验。钢管脚手架直角扣件抗滑性能试验、抗破坏性能试验、扭转刚度性能试验，旋转扣件抗滑性能试验、抗破坏性能试验，对接扣件抗拉性能试验，底座抗压性能试验。
200kN盘扣式钢管支架构件试验机；200kN钢管脚手架扣件试验机；B标准型Z重型盘扣式钢管支架；WDJ碗扣型多功能脚手架构件；轮扣式圆盘式插卡式脚手架试验机；200kN脚手架支撑架立杆抗压承载力试验；脚手架横杆抗弯承载力试验；井架扣件强度性能节点抗拉承载力试验；脚手架节点抗压抗剪抗弯抗扭承载力试验；脚手架斜杆单元承载力检验；GB/T15831-2023钢管脚手架扣件；脚手架托座抗压承载力试验；恒瑞金试验机；GB 24911-2010碗扣式钢管脚手架构件；JGJ/T414-2018建筑施工模板和脚手架试验标准；GB 24910-2010钢板冲压扣件；JG/T13-1999门式钢管脚手架；T/CMRA 01-2016承插型键槽式钢管脚手架；JIS A8951；JIS B0151-2018；ANSI/SSFI SC100；BS 1139-1.2；EN 12812；DIN BS NF EN 74-1；DIN BS NF EN74-2；HRJ Tester；SN EN 39-2001；JGJ 166-2016；JGJ 130-2011；JGJ 231-2010；JGJ 128-2010；JGJ 164-2008；JGJ 183-2009；JGJ 202-2010；JGJ 254-2011；GB 50068-2018；T/CEC 211-2019；TB/T2292；JC/T2287-2014；DL/T1209.4-2014E；CB 4204-2012；SH/T3555-2014；GB/T3091-2015；100N.m/3000N浮动油封跑合磨损泄漏性能试验机；2工位浮封跑合磨损泄漏性能试验机；浮动油封动态密封及可靠性试验三维力测试系统；100kN/4000N.m密封圈模拟实际工况高低温压扭耐久试验机；支重轮磨合跑合疲劳耐久寿命试验机；浮封环密封荷载面压试验机；引导轮疲劳耐久性试验测试系统；30kN.m工程机械车辆刹车制动压力扭矩试验机；300kN装载机挖掘力提升力试验机；150kN交通运输车辆轮毂旋转弯矩振动加速度疲劳试验机；TFB3030金属波纹管垂向横向二维高温压力疲劳试验机；350kN掘进机盘形滚刀摩擦磨损疲劳寿命试验测试系统；5kN电子伺服动态疲劳试验机；30kN/100kN橡胶弹性缓冲垫层疲劳试验机；300N.m通信光缆光纤接头盒连接器扭转弯曲疲劳试验机；500N～30kN橡塑高分子材料拉压疲劳试验机；锚杆锚固旋转搅拌轴力扭力疲劳循环伺服试验机；飞机轮对跑道交变冲击荷载耐久性测试系统；5000N.m汽车变速箱可靠性静扭试验台；转向驱动桥变速箱差速器总成试验台；十工位汽车操纵线拉索线强度试验机；传动轴联轴器力矩限制器打滑力矩标定测试系统；200kN.m联轴器扭矩标定预磨极限测试刚度疲劳； 500kN.m风力发电机组联轴器扭矩试验测试系统；联轴器膜片拉弯扭三维动力荷载疲劳试验系统；金属膜片拉摆扭三轴疲劳试验机系统；400kN预制木制工字梁静曲强度性能试验机；滚刀刀圈耐磨粒磨损抗冲击疲劳试验机；
Steel Tube Scaffold Couplers Testing Machine；Bowl-coupler Type Steel Tube Scaffolding Member Tester；Disk Lock Steel Tubular Scaffold Components Testing Machine；Steel plate punched coupler；Standard for test of construction formwork and scaffold；Safety and technical code for frame scaffoldings with Buckles Bowl in construction；Technical code for safety of steel tubular scaffold with couplers in construction；Technical specification for safety of disk lock steel tubular scaffold in construction；Technical specification for construction safety of steel scaffold building in petrochemical industry；Specification for Substation Ascending Operation and Protective Device；Composite Quick-installed Scaffold；Welded steel pipes for low pressure liquid delivery；Tubular steel scaffolds；Standards for Testing and Rating Scaffold Assemblies and Components；Metal scaffolding Tubes Specification；False work-Performance requirements and general design；Special couplers Requirements and test procedures；Requirements and test procedures；Technical code for safety of frame scaffoldings with steel tubules in construction；Door-type Steel Pipe Scaffolding Tester；Tubular Steel Frame Scaffolding Tester；Coupling Diaphragm Tensile Bending Torsion 3D Dynamic Load Fatigue Test System； Metal diaphragm tensile swinging torsion fatigue testing system；
Couplings Torque Calibration Pregrinding Test Platform；Wind Turbines Couplings Torque Test System；Steel Strand Relaxation Testing Machine；Static Load Anchoring Testing Machine；Tension Creep Rupture Strength Testing Machine；No Vibration Servo Steel Strand Tensile Tester；No Vibration Steel Strand Steel Bars Tensile Integration Tester；Steel Strand Skew Tensile Testing Machine；Servo Steel Strand Skew Tensile Tester；
1000 Hours Metallic Materials Tensile Stress Relaxation Tester；1000 Hours Steel Strand Relaxation Tester；
Wood Timber Artificial Board Testing Machine；Wood-based Panels Testing Machine；Artificial Board Testing Machine；Wood Testing Machine；MDF Testing Machine；Computer Wood-based Panels Testing Machine；Wood-based Panels Large Span Flexural Strength Tester；MDF Large Span Flexural Strength Tester；Large Span Artificial Board Flexural Strength Tester；Wood-based Panels Long Test Specimen Tester；Laminated Veneer lumber Structural Timber Mechanical Properties Tester；Laminated Veneer Lumber Bending Strength Tester；Structural Timber Characterization Tester；Prefabricated Wood I-Joists Static Bending Performance Tester； |
